More Filters
This ad is for a used left and right pair of OEM Bosch tail light lenses with U.S.A. black trim for the 1973 - 1989 Porsche 911, 912, 930 and or a 1976 Porsche 912E. These are not reproduction they are the real Bosch originals and are no longer available original lens with the Bosch imprint. The lens are in very good condition. Not perfect mind you but good condition. If you wanted them to be e...
This ad is for a used OEM throttle body for a 1973 - 1975 Porsche 911. I am not familiar with the CIS and perhaps the throttle body will fit other year model cars as well so please do your homework to insure it is correct for your needs. The unit is in good working condition and aside from needing a thorough cleaning the unit can be used as is. The Porsche part number is 911.110.247.01 I am ask...
This ad is for a used OEM headlight washer relay switch for a 1984 - 1989 Porsche 911 Carrera or perhaps a Porsche 930. I am not at all sure of this so please do your homework. The Hella washer relay is in good working order. The Porsche part number is 928.618.111.00 The Hella part number is 5WD 00 3784 03 I am asking $50.00 for the relay plus $10.50 in postage and paypal fees
This ad is for a new OEM tail light assembly for the driver side of a 1987 - 1989 Porsche 911 Carrera and or a Porsche 930. The assembly includes the housing, the lens and the plug in wiring harness. I bought it for my 1974 911 Carrera clone but found out that it fits a later model Carrera and not the earlier G models. Very expensive assembly. I paid over $550.00 for the assembly. My loss is yo...
This ad is for a new reproduction of the right rear tail light Lens for a 1974 - 1989 Porsche 911 and or a Porsche 912E or a Porsche 930. This is a decent reproduction at 1/3 the cost of an original OEM red lens with black trim for the American market This lens was purchased from Pelican Parts for $46.00 plus postage last year. The Porsche part number for the lens is 911.631.952.00 I am asking ...
This ad is for two Bosch distributor housings for restoration or for parts for a 1974 - 1976 Porsche 2.7 with CIS injection. I don't know much about these cores so please do your home work to insure they are correct for your needs. Each of the housings look to be in decent shape and are thought to be a good base for restoration or at a minimum could be a good source for parts. One of them is pr...
This ad is for one OEM accelerator pull rod for what is believed to b e a 1973.5 - 1983 Porsche 911 with CIS. It is very possible this pull rod will fit another year model Porsche so please do your home work to insure it is correct for your needs. Here is what I can tell you. The rod measures about 22 inches (558 mm) tip to tip including the ball socket. The ball socket looks to be in good cond...
This ad is for a like set of left and right aftermarket light weight tail lights for a 1969 - 1989 Porsche 911. These extremely light weight tail lights were used exclusively on the lightweight factory 1967 Porsche 911 R. The factory only build 20 of the lightweight 1967 911 R race cars. These reproductions are equal or better quality than the OEM parts. They are high quality fiberglass housing...
This ad is for a used pair of OEM Bosch tail light lens for a 1969 - 1973 Porsche 911 / 912. These European model lenses may very well fit a 1974 - 1986 Porsche 911 / 930 as well as a 912E of 1976. Just do your home work to insure they are correct for your needs. The lenses aren't in too bad of a shape especially when you consider their age. The right side lens has some issues. Crack at both fa...
This ad is for a set of six used Bosch CIS fuel injectors for a 1974 - 1983 Porsche 911 and Porsche 911SC. These injectors look to be in very good condition. One or two look to be brand new. The Porsche part number for the injector is 911-110-225-01 I am asking $200.00 for the set plus $13.50 in postage and paypal fees
This ad is for four OEM 84mm alusil pistons and cast iron cylinders for a 1971 - 1972 Porsche 911T with a 2.4 liter engine. The pistons and cylinders look to be in very good condition. Unfortunately 2 pistons and cylinders were lost in transit from the ultra-sonic cleaners. The pistons are K Schmidt with a 8.6 compression with a part number 084072. All in all the pistons look to be usable. The ...
This ad is for a pair of used Front Brake Caliper Backing Plates for a 1965 - 73 Porsche 911 E/S. The backing plates are in good condition. Just dirty and perhaps needing a fresh coat of paint. Or perhaps stripped and powder coated. The Porsche part number is 901.351.801.17 I am asking $80.00 for the parts plus $15.50 in postage and paypal fees
This ad is for a new aftermarket front fuel tank support stamped sheet metal for a 1974 - 1989 Porsche 911 and or a Porsche 912E or 930. The piece may fit an earlier 911 or 912 but please do your homework to insure it is the piece correct for your needs. This section of sheet metal can be found in the front trunk, in front of the visible section of fuel tank, connecting all the way across the c...
This ad is for a set of NOS original genuine Porsche copper cylinder base gaskets for a 1974 - 1977 Porsche 911 with a 2.7 liter engine. The Porsche part number for the gasket is 911.104.192.00 I am asking $25.00 for the set plus $8.50 in postage and paypal fees
This ad is for a used cylinder head for a 1974 - 1975 Porsche 911 2.7 liter with CIS fuel injection. The cylinder head I am told will also fit other year models too but please do your homework to ensure the head is correct for application. The head has been media blasted and from what I can determine, it is in decent overall condition and comes assembled. There is some corrosion around the inta...
This ad is for a used OEM fuel tank for a 1984 - 1989 Porsche 911 with fuel injection although the fuel tank will also work just fine for a 1974 - 1983 Porsche 911 with CIS. I can't imagine the fuel tank not working for a Porsche with carburetors too but I am not an expert so but please do your home work to insure will satisfy your needs. The fuel tank is in very good condition and comes with t...
This ad is for a quick release steering wheel setup for a 1970 - 1976 Porsche 914 and or a 1965 - 1989 Porsche 911. The Rennline quick release is new. I bought it for a Porsche 914 race car project but have changed course. Unlike similar units on the market, this hub has a tapered asymmetrical socket that eliminates any chance of looseness as the hub breaks in. Rennline Quick Releases are equip...
This ad is for a used left and right torsion bar hole cover assembly for a 1969 - 1983 Porsche 911. In looking at them I believe they will fit other year model cars as well so please do your homework to insure they are correct for your needs. The OEM parts are also call spring covers. They are in good condition but the welded studs have been broken and new ones will need to be welded. I have in...
This ad is for a two used OEM connecting rods for a 1972 - 1974 Porsche 911 with a 2.4 liter and or a 2.7 liter engine. Please do your homework to ensure that these are correct for your application. I will help answer questions if I can or make additional photographs if necessary. The connecting rods have been modified for I suspect for clearance purposes and perhaps to reduce rotating mass. Th...
This ad is for one NOS OEM piston with piston rings and wrist pin for a 1972 - 1973 Porsche 911 T. It is a 84.00mm piston 7.5:1 compression complete with new piston rings, a wrist pin and circlips. I don't know much about the piston aside from it is in the original box and is new. The markings on the top look like KD1 0 A8 and on the inside 1275 $$ 084075 +1 30 The Porsche part number appears t...
Your Listing Here