More Filters
This ad is for one OEM accelerator pull rod for what is believed to b e a 1965 - 1968 Porsche 911. In looking this pull rod it is entirely possible it will fit the 1969 - 1972 year model Porsche 911 as well. But so please do your home work to insure it is correct for your needs. Here is what I can tell you. The rod measures about 23 inches (584 mm) tip to tip including the ball socket. The ball...
This ad is for one used OEM tunnel mounted accelerator rod for a 1965 - 1989 Porsche 911 / 912 and or a Porsche 930. The accelerator rod is also appropriate for a 1976 912E. One appears to be a new rod with a current design while the other appears to be an older design. Both accelerator rods have the ball socket or ball cup mounted. The rods themselves and the ball cups look to be in good condi...
This ad is for a used OEM accelerator rod lever for a 1974 - 1989 Porsche 911. This part is no longer available. The lever is in very good condition and comes with two new bushings. I have not rebuilt a bracket before but in looking at this part and a bracket I just listed it appears as though one would bore the holes on the bracket to fit the bushings and then install thus eliminating all slop...
This is ad is for an OEM accelerator pedal for a 1984 - 1989 Porsche 911 Carrera although it will fit other year models as well. Just do your homework to insure it is correct for your need. The accelerator pedal is in very good condition. It isn't cracked or brittle. The Porsche part number is 911.423.111.03 I am asking $35.00 for the pedal plus $8.50 in postage and paypal fees
This ad is for a new fully adjustable custom accelerator pedal assembly for a 1968 -1998 Porsche 911 and or most all Porsche models. This product is made and marketed by Rennline a noted aftermarket supplier to Porsche owners worldwide. This accelerator pedal solves solves the problem of the 911 gas pedal being located on a much lower plane then the brake and clutch pedals. The pedal can be adj...
This ad is for a used OEM tunnel mounted accelerator rod extension for a 1965 - 1989 Porsche 911 / 912 and or a Porsche 930. The accelerator rod extension is also appropriate for a 1976 912E and may be appropriate for a Porsche 914. The rod extension and the ball cup looks to be in good condition. Not NOS but in good condition. The rod looks to measure 5" and 5 11/16"" including the ball cup. T...
Similar
This ad is for what appears to be a custom made hand throttle assembly for a 1965 - 1973 Porsche 911 and or perhaps a 1970 - 1972 Porsche 914-6. It appears to be custom made hand throttle and certainly not factory. But it might fit the opening in the tunnel mounted emergency brake assembly. Please be sure you do your homework to insure it will work for your needs. It appears to be decently made...
This ad is for a set of use floor board components for a 1970 -1976 Porsche 914 and I believe the Porsche 911 through 1977 and possibly later. So please do your homework to insure these pieces are correct for your needs. The clutch pedal stop is no longer available and this on is in good shape. The accelerator pedal stop has had the rivets drilled so as to allow it to be removed from the pedal ...
This ad is for a used OEM Sachs aluminum pressure plate and starter ring assembly for what is believed to be a 1972 - 1985 Porsche 911. This is a highly desirable addition to the Porsche drive train in many folks opinion because it reduces the heavy rotating mass of the stock pressure plate allow the engine rev more quickly resulting in quicker acceleration. The pressure plate looks to be in go...
This ad is for a new K & N Air filter for a 1973 - 1983 Porsche 911 with fuel injection. The label also say it will fit a Porsche 914-6 but I am not sure about that so please do your home work to insure it is the correct filter for your needs. The K&N air filter supposedly is designed to increase horsepower and acceleration. It is a washable and reusable air filter with a Million Mile Limited W...
This ad is for a used OEM heater control lever for a 1970 - 1976 Porsche 914 with a optional center console. This lever may very well fit a Porsche 911 for use as the floor mounted manually operated accelerator lever but please do your homework to insure it is correct for your needs. The heater control is in good condition and comes with the red knob. The heater control lever used on a 914 with...
Your Listing Here