‎For Sale

** Triumph 4-Post and 2-Post Car Lifts and Wheel Service Equipment ** ** Stratus and Atlas 2-Post Auto Lifts ** ** www.allautomotiveequipmentsupply.com ** All Automotive Equipment Supply - ** SHIPS FREE ** ~ (844-536-6505) Triumph 4-Post Auto Lifts: Include: Caster Kit, Drip Trays, Jack Plate, Steel Approach Ramps NSS8: 4 Post Auto Storage Lift (standard height and length) 8,000lb...

Python and all of it supplies including both tanks, heatrock, day and night bulbs and UVB bulb all was bought back and May still have receipt. Must be picked up or meeting only Faulkner County

This ad is for four OEM 84mm alusil pistons and cast iron cylinders for a 1971 - 1972 Porsche 911T with a 2.4 liter engine. The pistons and cylinders look to be in very good condition. Unfortunately 2 pistons and cylinders were lost in transit from the ultra-sonic cleaners. The pistons are K Schmidt with a 8.6 compression with a part number 084072. All in all the pistons look to be usable. The ...

This ad is for a pair of used Front Brake Caliper Backing Plates for a 1965 - 73 Porsche 911 E/S. The backing plates are in good condition. Just dirty and perhaps needing a fresh coat of paint. Or perhaps stripped and powder coated. The Porsche part number is 901.351.801.17 I am asking $80.00 for the parts plus $15.50 in postage and paypal fees

This ad is for a used OEM fuel pump relay for a 1975 Transporter and perhaps others. I believe the part is also used on the Audi and I think a water cooled Porsche 921. Not sure exactly so please do your homework. The Part number is 433.906.059 I am asking $15.00 for the part plus $5.50 in postage and paypal fees

This ad is for a new aftermarket front fuel tank support stamped sheet metal for a 1974 - 1989 Porsche 911 and or a Porsche 912E or 930. The piece may fit an earlier 911 or 912 but please do your homework to insure it is the piece correct for your needs. This section of sheet metal can be found in the front trunk, in front of the visible section of fuel tank, connecting all the way across the c...

This ad is for an OEM clutch cable roller bracket for a 1973 - 1976 Porsche 914-4 and it may have uses on a VW with a TIV engine. I just don't know. The parts appear to be in very good condition and can be used as is. I may have the plastic roller and the clutch cable if you need those parts too. The Porsche part number for the bracket is 914.423.030.02 I am asking $50.00 for the parts plus $12...

Brand New Rattle, beanie and socks

New In Box. Never played

Brand New. 00754W model

Registered/registerable, Current vaccinations, Veterinarian examination, Health certificate, Health guarantee, Pedigree, Travel crate

There are about 500 3x3", 400 3x4" and 800 4x10" zip seal baggies, 2mil. Message me if interested. original post date: 2021-06-19

This ad is for a set of NOS original genuine Porsche copper cylinder base gaskets for a 1974 - 1977 Porsche 911 with a 2.7 liter engine. The Porsche part number for the gasket is 911.104.192.00 I am asking $25.00 for the set plus $8.50 in postage and paypal fees

This ad is for a used OEM multi-purpose relay switch for a 1965 - 1989 Porsche 911 / 912 and or a Porsche 914. This part is also used on several Audi models as well as VW models. Please do your homework to insure it is correct for your needs. The markings on the the SWF part shows 12V 100W R 200.925. There are four posts The SWF part number shows to be 111 941 583 A I am asking $15.00 for the r...

This ad is for a used cylinder head for a 1974 - 1975 Porsche 911 2.7 liter with CIS fuel injection. The cylinder head I am told will also fit other year models too but please do your homework to ensure the head is correct for application. The head has been media blasted and from what I can determine, it is in decent overall condition and comes assembled. There is some corrosion around the inta...

This ad is for a used OEM fuel tank for a 1984 - 1989 Porsche 911 with fuel injection although the fuel tank will also work just fine for a 1974 - 1983 Porsche 911 with CIS. I can't imagine the fuel tank not working for a Porsche with carburetors too but I am not an expert so but please do your home work to insure will satisfy your needs. The fuel tank is in very good condition and comes with t...

This ad is for a quick release steering wheel setup for a 1970 - 1976 Porsche 914 and or a 1965 - 1989 Porsche 911. The Rennline quick release is new. I bought it for a Porsche 914 race car project but have changed course. Unlike similar units on the market, this hub has a tapered asymmetrical socket that eliminates any chance of looseness as the hub breaks in. Rennline Quick Releases are equip...

This ad is for a used left and right torsion bar hole cover assembly for a 1969 - 1983 Porsche 911. In looking at them I believe they will fit other year model cars as well so please do your homework to insure they are correct for your needs. The OEM parts are also call spring covers. They are in good condition but the welded studs have been broken and new ones will need to be welded. I have in...

This ad is for a two used OEM connecting rods for a 1972 - 1974 Porsche 911 with a 2.4 liter and or a 2.7 liter engine. Please do your homework to ensure that these are correct for your application. I will help answer questions if I can or make additional photographs if necessary. The connecting rods have been modified for I suspect for clearance purposes and perhaps to reduce rotating mass. Th...

This ad is for one NOS OEM piston with piston rings and wrist pin for a 1972 - 1973 Porsche 911 T. It is a 84.00mm piston 7.5:1 compression complete with new piston rings, a wrist pin and circlips. I don't know much about the piston aside from it is in the original box and is new. The markings on the top look like KD1 0 A8 and on the inside 1275 $$ 084075 +1 30 The Porsche part number appears t...